Wenxingxia Construction Machinery has reached a strategic cooperation with a well-known engineering design institute to jointly create intelligent construction machinery solutions

Release time:

2023-03-27

The speed regulation failure of the gear reduction motor is generally caused by the damage of the motor itself.

The speed regulation failure of the gear reduction motor is generally caused by the damage of the motor itself. The motor itself contains a capacitor, and the motor will not run as long as the capacitor is damaged, and the motor will not run if the internal coil of the motor is damaged. 1. When the geared motor is not running, check the capacitor first. Use a capacitance meter to measure the quality of the capacitor. If the capacitor is damaged, replace it with a capacitor of the same type. Because the positive and negative poles of the capacitor cannot be reversed, use a non-polar capacitor. There will be bumps or liquid leakage on the damaged surface of the capacitor. 2. If the internal coil of the geared motor is faulty, the motor can only be repaired. In addition, the gear oil inside the small gear reduction motor is generally made of plastic. When the gear is damaged and the motor is idling, just replace the corresponding gear. There is a gearbox inside the large gear reduction equipment, and the gearbox oil needs to be replaced regularly, otherwise the gears will not be lubricated better and cause abnormal wear.